Blog

How to Set Up the Iceriver KS7 30T for Kaspa Mining – Complete Guide

December 12, 2025 On December 9, 2025

Howtosetuptheiceriverks730tforkaspamining 1

What Makes the Iceriver KS7 30T Unique?
Pre-Setup Checklist
Step-by-Step Setup Guide
Performance Optimization
Troubleshooting Guide
Long-Term Maintenance Schedule
Final Thoughts
Where to Buy the Iceriver KS7

1. What Makes the Iceriver KS7 30T Unique?

The Iceriver KS7 30T is designed specifically for the Kaspa (kHeavyHash) algorithm, offering high efficiency and stability. Key specifications include:

Hashrate: 30 TH/s
Power Consumption: ~3400W
Efficiency: ~113 J/TH
Cooling: Dual high-speed fans
Connection: Ethernet only
Optimal environment: 0–30°C, humidity <65%

2. Pre-Setup Checklist

Electrical Requirements

220–240V AC dedicated line
3500W circuit minimum, preferably 20A
Surge-protected PDU or UPS

Network Requirements

Ethernet cable (CAT5e or CAT6), WiFi not supported
Stable network with low latency
Static DHCP recommended

Environmental Requirements

Ambient temperature 0–30°C
Humidity <65%
Front-to-back airflow and dust-free
Altitude <3000m

3. Step-by-Step Setup Guide

Step 1 — Unboxing & Safety Inspection

Check for damages, loose cables, and ensure fans spin freely.

Step 2 — Connect Power

Plug into a dedicated 220V line with surge protection. Turn on the power switch. Fans spin at full speed briefly during initialization.

Step 3 — Connect Network

Use a high-quality Ethernet cable connected to a stable router or switch. Avoid Wi-Fi or powerline adapters.

Step 4 — Find the Miner IP Address

Scan your network via DHCP list or IP scanner. Look for device name “Iceriver” or “KS7”.

Step 5 — Log in to Control Panel

Default credentials: admin/admin. Change password immediately for security.

Step 6 — Configure Mining Pool

Example (F2Pool):
stratum+tcp://kaspa.f2pool.com:4400
Worker: KASYourWallet.worker1
Password: x

Step 7 — Apply Settings & Start Mining

Save settings, restart miner, verify ~30 TH/s hash rate and pool share acceptance.

KS7 Setup Flowchart

KS7 30T Setup Flowchart — Quick Steps

Step 1 Unbox & Inspect
Step 2 Connect Power
Step 3 Connect Ethernet
Step 4 Power On & Self-test
Step 5 Find IP Address
Step 6 Configure Pool
Step 7 Verify Hashrate & Monitor Shares

4. Performance Optimization

Keep intake air <30°C to prevent thermal throttling
Clean dust filters and fans regularly
Use stable, short power cables
Monitor network latency and pool share acceptance

5. Troubleshooting Guide

No hashrate: check pool URL, wallet, and network
High temperature: improve airflow and clean dust
IP panel inaccessible: rescan IP or reset miner
Loud fan noise: use acoustic boxes or rubber pads

6. Long-Term Maintenance Schedule

Interval	Task
Weekly	Check hash rate & pool stats
Monthly	Clean dust filters
2–3 months	Deep clean fans
6 months	Inspect cables & PSU
Yearly	Optional thermal paste replacement

7. Final Thoughts

The KS7 30T is ideal for Kaspa mining due to its efficiency, stability, and easy setup. Proper setup and maintenance ensure maximum uptime and profitability.