Complete Setup Guide for Your OCtaxe 9.6T Bitcoin Miner

Introduction to the OCtaxe 9.6T Miner

The OCtaxe 9.6T is a modern, application-specific integrated circuit (ASIC) miner designed exclusively for Bitcoin. It balances impressive performance with home-friendly acoustics and size. Delivering up to 9.6 Terahashes per second (TH/s) with an efficiency of around 17 J/TH, it’s a powerful tool for both new and experienced miners looking to contribute to network security and earn Bitcoin.

Unboxing and Initial Inspection

Carefully unbox your miner and confirm you have the following components: The OCtaxe 9.6T Miner Unit, a compatible Power Supply Unit (PSU), an Ethernet Cable for a stable network connection, and a Quick Start Guide. Visually inspect the miner for any signs of damage that may have occurred during shipping.

Step 1: Physical Setup and Connections

1. Choose a Suitable Location: Place your miner in a cool, dry, and well-ventilated area. Ensure there is ample space around the intake and exhaust for proper airflow.

2. Connect to Power: Firmly plug the DC connector from the PSU into the miner’s power port. Then, connect the PSU to a grounded wall outlet. For stability, avoid using extension cords.

3. Connect to the Internet: Use the provided Ethernet cable to connect the miner directly to an available port on your home router. A wired connection is strongly recommended for maximum reliability.

Step 2: Finding and Accessing the Miner

1. Power On: Switch on the miner. You should hear the fans spin up and see LED indicators activate.

2. Locate the IP Address: Find the miner’s IP address by checking the list of connected devices in your router’s administration panel. Look for a device named “OCtaxe” or “bitaxe.”

3. Access the Dashboard: Open a web browser on any device on your network. Type the miner’s IP address into the address bar and press Enter to load the configuration dashboard.

Step 3: Crucial Software Configuration

1. Log In: Use the default credentials (e.g., admin/admin) and immediately change the default password for security.

2. Navigate to Pool Settings: Find the configuration section, typically labeled “Miner Configuration” or “Pool Setup.”

3. Enter Pool Details: To mine with the Public-Pool, enter the Pool URL as stratum+tcp://public-pool.io, the correct port, and your Bitcoin wallet address as the Worker. For more information, you can visit the Public-Pool website.

4. Save and Apply: Click “Save & Apply.” The miner will restart to apply the new configuration.

Step 4: Verifying Operation and Performance

1. Check the Dashboard: After a few minutes, the main status page should show a current hash rate that stabilizes near 9.6 TH/s. Monitor temperature and hardware error rates.

2. Verify on the Pool: Log into your pool account on the Public-Pool website using your Bitcoin wallet address. After 10-20 minutes, you should see your worker actively submitting shares, confirming a successful setup.

Optimization and Maintenance Tips

Let the miner run at default settings for 24-48 hours to establish a baseline before attempting any overclocking. Regularly use compressed air to remove dust from the fan and heatsinks, as dust buildup is the primary cause of overheating. Make a habit of checking the miner’s dashboard and your pool stats page weekly to ensure consistent performance.

Troubleshooting Common Issues

If the miner is not found on the network, double-check all cable connections and restart your router and miner. A high hardware error rate or frequent reboots usually indicates an unstable overclock or insufficient cooling; reset to default settings and ensure proper ventilation. If there is no hash rate on the pool dashboard, verify the pool URL, port, and especially your Bitcoin wallet address in the miner’s configuration.

Conclusion: You’re Now Mining Bitcoin

Congratulations! Your OCtaxe 9.6T is now actively securing the Bitcoin network. By following these steps, you’ve successfully integrated a powerful piece of technology into your home. As you gain more experience with home mining, you may also want to explore other solo mining devices designed for stable, long-term operation, depending on your goals and available space.

Remember, mining is a long-term activity—prioritize stable operation, continuous learning, and proper maintenance to ensure your miner runs effectively for years to come.